Topic: 2001 SV 650 Koso RX2N Install help!  (Read 5238 times)

0 Members and 1 Guest are viewing this topic.

Offline MartyR

  • 998cc
  • *****
  • MartyR's Gallery
  • Posts: 770
  • Keepin it simple.
    • View Profile
  • Bike: 05 20th Anni GSXR-750, RIP 09 Ninja 250 (11/08-10/18/11)
  • Years Riding: 5yrs
  • Location: Anahiem
2001 SV 650 Koso RX2N Install help!
« on: 09/28/17 11:30PM »
Hey y'all!  So I'm trying to help a friend wire up the Koso RX2N gauges to his 01 SV 650.  The only problem is that the wiring diagram makes sense, but isn't working.  I'm matching the wires and so far the only part of the gauges that work are:
Turning on when bike is on. 
Blinker indicators (left and right)
High Beam
If anyone can help it would be greatly appreciated.  This is the wiring diagram I have. 

The Blu/Blk wire says it neutral and should be in conjunction with an Orange/Green wire, but it's not working.  Also having trouble with the Oil, Fuel, and Water Temp.

For Koso they are as follows:
Water: Grn/Blu
Fuel: Yellow/Why
EFI: Yellow/Red

*we've been working on the bike at night, so we haven't tested to see if we matched the REV wires right.
"Yesterday was history, Tomorrow is a mystery and Today is a gift.  That is why it is called The Present." - Master Oogway

Offline r0ckrat

  • Advisory Board
  • 800cc MOTO GP
  • *
  • r0ckrat's Gallery
  • Posts: 2023
    • View Profile
  • Bike: 2016 BMW R1200R
  • Years Riding: Since 6/4/2013
  • Location: Long Beach
Re: 2001 SV 650 Koso RX2N Install help!
« Reply #1 on: 09/29/17 11:01AM »
Verify that you have the correct wiring diagram for the 2001. Is it an S model? Round nose fairing?

This thread on SVRider may be of some help:


Page created in 0.11 seconds with 32 queries.