Topic: Single sided swingarm stand to borrow?  (Read 534 times)

0 Members and 1 Guest are viewing this topic.

Offline brl0301

Single sided swingarm stand to borrow?
« on: 09/16/17 09:48AM »
Hey guys i just bought a mv 675 and realize my regular rear stand won't work to get the rear wheel off. I was hoping someone has a stand i can either rent or borrow for a few hours. I have a track day coming up and need to swap tires. Thanks in advance

Offline VFRCapt.Bob

  • 599cc
  • ***
  • VFRCapt.Bob's Gallery
  • Posts: 242
  • The Gentleman's Hooligan
    • View Profile
  • Bike: 1998 VFR800/ 2009 FZ1/ 2002 YZ425f
  • Years Riding: 33
  • Location: LongBeach
Re: Single sided swingarm stand to borrow?
« Reply #1 on: 09/18/17 02:31PM »
I have one you can have. Will send a picture and measure the O.D. to see if it will work. Works with Honda VFR800 for reference.
99 VFR800
2009 FZ1
2001 YZ426F

Offline brl0301

Re: Single sided swingarm stand to borrow?
« Reply #2 on: 09/18/17 02:45PM »
I have one you can have. Will send a picture and measure the O.D. to see if it will work. Works with Honda VFR800 for reference
thatd be awesome! thanks! I looked online and it looks like they are different sized pins, but it should work for the time being until I can order a replacement pin.
« Last Edit: 09/18/17 02:49PM by brl0301 »

Offline OOTV

  • Advisory Board
  • 800cc MOTO GP
  • *
  • OOTV's Gallery
  • Posts: 1972
    • View Profile
  • Bike: Honda VFR800 (2001&2009) Ducati 900SS/SP (1995)
  • Years Riding: 30yrs.
  • Location: Anaheim, CA
Re: Single sided swingarm stand to borrow?
« Reply #3 on: 09/18/17 03:00PM »
I have one you can have. Will send a picture and measure the O.D. to see if it will work. Works with Honda VFR800 for reference
thatd be awesome! thanks! I looked online and it looks like they are different sized pins, but it should work for the time being until I can order a replacement pin.
If the Honda pin is too big, you can probably have a machine shop turn in on a lathe to the right size. Although it might cost you about the same you wouldn't have to wait as long to get it.
“You can checkout any time you like, but you can never leave...”

Offline brl0301

Re: Single sided swingarm stand to borrow?
« Reply #4 on: 09/18/17 03:07PM »
I have one you can have. Will send a picture and measure the O.D. to see if it will work. Works with Honda VFR800 for reference
thatd be awesome! thanks! I looked online and it looks like they are different sized pins, but it should work for the time being until I can order a replacement pin.
If the Honda pin is too big, you can probably have a machine shop turn in on a lathe to the right size. Although it might cost you about the same you wouldn't have to wait as long to get it.
it looks like the Honda pin in 28mm and the MV pin is 42mm. I'm imagining itll work just fine as long as I'm not too rough with the bike while its up on the stand.

Offline VFRCapt.Bob

  • 599cc
  • ***
  • VFRCapt.Bob's Gallery
  • Posts: 242
  • The Gentleman's Hooligan
    • View Profile
  • Bike: 1998 VFR800/ 2009 FZ1/ 2002 YZ425f
  • Years Riding: 33
  • Location: LongBeach
Re: Single sided swingarm stand to borrow?
« Reply #5 on: 09/19/17 10:41AM »
I will send you my address. Just let me know when you want to come get it. Can leave it in my driveway for you. Similar to this one.
99 VFR800
2009 FZ1
2001 YZ426F

 

Page created in 0.26 seconds with 41 queries.

support@ocmoto.com
 Facebook