Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - MOTO-D

Pages: [1] 2
1
If you're looking for a pair of levers for your Yamaha R6, it's hard to resist the many cheap ones online because they look good in pictures and your thinking to yourself "aren't all levers the same?". The simple answer is no.

Introducing the Bonamici Yamaha R6 Folding Levers that were designed for professional race teams which demand exact fit for precise and and direct shifting and braking. NO WIGGLE. NO BRAKE LOCKUP. NO BURNT CLUTCHES.



Unlike cheap levers that were copied, then copied again by someone else, and then copied again by another copy-cat by a seller who doesn't even ride, Bonamici takes braking and the use of the clutch lever seriously, so they design their sportbike levers directly off the bike and in their factory located in Otricoli, Italy.

Bonamici Yamaha R6 Brake & Clutch Levers (06-16) (click here)

Bonamici Yamaha R6 Brake & Clutch Levers (2017+) (click here)

<a href="http://www.youtube.com/v/Dks1TEQ1994?rel=0" target="_blank" class="new_win">http://www.youtube.com/v/Dks1TEQ1994?rel=0</a>


Riders also looking for the best R6 tank grip pads should check out MOTO-D by Eazi-Grip, they allow the rider to hold the tank with their legs for better control under braking and cornering.

MOTO-D by Eazi-Grip Tank Grips for Yamaha R6 (click here)


Bonamici Racing is available at a MOTO-D dealer near you or by visiting www.motodracing.com/bonamici-racing

MOTO-D on Facebook at https://www.facebook.com/motodracing and Instagram at https://www.instagram.com/motodracing

Contact MOTO-D via email at info@motodracing.com



Bonamici Racing products are the result of an accurate engineering and design process performed in-house by laser scanning each motorcycle in their factory located in Otricoli, Italy. Bonamici produces racing rearsets, engine case-savers, clip-ons, and folding levers in the highest grades of titanium, aluminum, magnesium, and steel alloys. Bonamici is able to assist customers and provide them with the best solutions to optimize their bike based on rider feedback. Technical support is provided by MOTO-D the Bonamici North American Distributor which can solve any problems with care.


2
It's amazing what a difference a good motorcycle sock can make when riding, you can actually fit into your boot properly (vs. a bulky white cotton tube sock) which rests on your footpegs translating into better bike feel and control. MOTO-D "Cool-Tec" Motorcycle Socks are Moisture Wicking, Anti-Microbial, and Compression Style Smooth.

Check them out at www.motodracing.com



They allow the rider to slip their feet into their riding shoes or boots easily and since there is no bulk but they keep your cool on hot summer days, they are the best motorcycle socks!



MOTO-D "Cool-Tec" Summer Motorcycle Socks are Unisex, One-Size Fits All, High Stretch, and Feature a Unique Dotted Traction Grip Sole for Extra Stick Inside your Boot



Pair up with the MOTO-D "Cool-Tec" Motorcycle Undersuit to Keep Cool and Focused, it's the #1 Motorcycle Riding Innersuit and fits great inside your leathers or riding gear, makes a world of difference to riders who want to stop sticking to their leathers!




3
Bonamici BMW R 9T Rearsets are crafted in Italy to be gorgeous and the styling update needed to make this motorcycle standout from the others in the crowd.

Bonamici BMW R nineT Rearsets (click here)


Bonamici BMW R nine T Rearsets were designed in Italy to have exact fitment, precise and smooth shifting (rearsets use bearings), and provide a racier feel due to their improved height. In addition, they feature super high-grip footpegs that are larger than standard footpegs for increased feel and weight transfer-ability while riding. Bonamici R nine T Rearsets also fit on the BMW R 1200R (2006-2014).

Bonamici BMW R nineT Rearsets (click here) (click here)


Bonamici BMW R nineT Rearsets (click here)


Riders also looking for high grip tank pads should check out MOTO-D by Eazi-Grip BMW R nine T tank grips, they allow the rider to lock into the tank of the motorcycle for better control without rashing their leg.

MOTO-D by Eazi-Grip Tank Grips for BMW R nine T (click here)


Bonamici Racing is available at a MOTO-D dealer near you or by visiting www.motodracing.com/bonamici-racing

MOTO-D on Facebook at https://www.facebook.com/motodracing and Instagram at https://www.instagram.com/motodracing

Contact MOTO-D via email at info@motodracing.com



Bonamici Racing products are the result of an accurate engineering and design process performed in-house by laser scanning each motorcycle in their factory located in Otricoli, Italy. Bonamici produces racing rearsets, engine case-savers, clip-ons, and folding levers in the highest grades of titanium, aluminum, magnesium, and steel alloys. Bonamici is able to assist customers and provide them with the best solutions to optimize their bike based on rider feedback. Technical support is provided by MOTO-D the Bonamici North American Distributor which can solve any problems with care.


4
It's a fact, if you ride a motorcycle you need to constantly check your tire pressures for optimal tire wear and maximum performance from your tires. Straight OEM valve stems are not only heavy and ugly, but they are also difficult to access since they stick up straight towards the center of the rim making it hard to fit the air chuck inside and into the valve.

Thankfully MOTO-D Angled Valve Stems are designed with an 89 degree design pointing the air valve towards the rider for easy access. No more banging your knuckles against the rim!

Available in sizes 11.3mm (fits most Japanese Sportbikes) and 8.3mm (fits most European Sportbikes), check them out at www.motodracing.com

Size: 11.3mm (0.453in): Fits all Suzuki, Yamaha, Kawasaki, and Honda Motorcycles with an 11.3mm valve stem opening (except Honda GL1500, GL1800, BMW R1150RT 02-04, BMW R1200GS 04-12, BMW K1200LT 99-08 , BMW K1100RS/K1100LT 93-96).

MOTO-D ANGLED MOTORCYCLE VALVE STEMS 11.3MM - RED


MOTO-D ANGLED MOTORCYCLE VALVE STEMS 11.3MM - BLACK


MOTO-D ANGLED MOTORCYCLE VALVE STEMS 11.3MM - BLUE


MOTO-D ANGLED MOTORCYCLE VALVE STEMS 11.3MM - GREEN


MOTO-D ANGLED MOTORCYCLE VALVE STEMS 11.3MM - ORANGE


Size: 8.3mm: Fits Most Italian (Ducati, MV Agusta, Aprilia) and Triumph Motorcycles including racing wheels Correzeria, Marchesini, OZ Racing).

MOTO-D ANGLED MOTORCYCLE VALVE STEMS 8.3MM - BLACK


MOTO-D ANGLED MOTORCYCLE VALVE STEMS 8.3MM - RED


Learn More at www.motodracing.com

5
MOTO-D Spring Clips save you the trouble of re-safety wiring crucial motorcycle parts and bolts used in high-performance riding and racing. Pair these with the MOTO-D Magnetic Drain Bolt and Oil Fill Cap. Also know as quick-release safety wire clips for use on sportbikes like Ducati Panigale, Suzuki GSX-R, Yamaha R1 / R6 / R3, Kawasaki ZX-10R / 6R, Ninja 300, CBR 600RR, KTM Superduke and RC 390 and more.

Available in sizes: XS, Small, Medium, Large, and Assorted Pack, check them out at www.motodracing.com

MOTO-D SPRING CLIP RACING SAFETY PINS ASSORTED (25/PACK)


MOTO-D SPRING CLIP RACING SAFETY PINS XS (25/PACK)


MOTO-D SPRING CLIP RACING SAFETY PINS S (25/PACK)


MOTO-D SPRING CLIP RACING SAFETY PINS M (25/PACK)


MOTO-D SPRING CLIP RACING SAFETY PINS L (10/PACK)




6
Bonamici Swingarm "Shark Guard" Chain Protectors are available in both T-6061 Aluminum and Carbon Fiber. Shark Guards are Mandatory in Most Racing Series and Organizations because they Protect Your Feet and Leg from being Eaten up by the Chain in a Crash! check them out at www.motodracing.com





Bonamici Racing products are the result of an accurate engineering and design process performed in-house by laser scanning each motorcycle in their factory located in Otricoli, Italy. Bonamici produces racing rearsets, engine case-savers, clip-ons, and folding levers in the highest grades of titanium, aluminum, magnesium, and steel alloys. MOTO-D is the Bonamici North American Distributor which can solve any problems with care.



7
MOTO-D "Pro-Series" Stands are Steel, Solid, and Cost Less than Other Heavy Stands. Now upgraded to include Large Rubber Wheels that Rotate on Bearings and Make Lifting Super Easy and Smooth. These are great stands for Suzuki GSX-R, Yamaga R1 / R6 / R3, Kawasaki ZX-10R / 6R, Ninja 300, CBR 600RR and more.

Check them out at www.motodracing.com





8
Deals and Vendors / Best tank grips for Aprilia RSV4?
« on: 02/01/18 04:12AM »
MOTO-D by Eazi-Grip has "Traction Grip" Tank Pads for the Aprilia RSV4 in Black or Clear and all kits include a Center Tank Pad, check them out at www.motodracing.com








9
Bonamici Racing Italy makes Adjustable Rearsets, Levers, Chain Adjusters, and Case Savers for the new Kawasaki ZX-10R (16-17-18) in Reverse "GP" Shift, check them out......








10
Deals and Vendors / Kawasaki's are cool!
« on: 01/30/18 04:05AM »

11
Bonamici Racing Italy makes Adjustable Rearsets, Levers, Chain Adjusters, and Case Savers for the 2017 Suzuki GSX-R 1000 check them out......









12
We had an amazing time last year, anyone going this year and wanna join?



Check out the full report from the 2017 MotoGP Round with MotoAmerica at COTA here....

https://www.motodracing.com/blog/moto-d-supports-teams-and-racers-at-motoamerica-motogp-circuit-of-the-americas-in-austin-tx




13
MOTO-D Titanium Caliper Bolts and Sprocket Nuts are Stronger and Lighter than OEM Steel Bolts plus come with the added protection of being Pre-Drilled for Safety Wire (Caliper Bolts Only). Caliper bolts come in packs of 4. Sprocket Nuts in packs of 6.

Fast Free Shipping at www.motodracing.com





14
Deals and Vendors / Ducati MOTO-D Rear Stand
« on: 03/15/15 05:24PM »
Ducati MOTO-D Rear Stand for Sale with pin for either:

42.5MM pin: MV AGUSTA

40.5MM: DUCATI PANIGALE, 1098/1198

27.5MM: KTM SUPERDUKE 1290, TRIUMPH SPEED TRIPLE, HONDA VFR / VTR

25.5MM: DUCATI MONSTER 696-796-1100, DUCATI 848, DUCATI STREETFIGHTER 848

23.5MM: KAWASAKI H2

www.motodracing.com


15
MOTO-D makes the best Single Sided Swingarm Stand for Ducati Monster, Panmigale, 848, and Streetfighters.

The rear stand is handcrafted solid steel and uses a precision lathed axle pin for smooth fit. The pin sits inside a rotating bearing for easy turning of the real wheel when oiling the chain, checking tire pressures, and running warmers.

On sale with No Tax / Free Shipping from www.motodracing.com


16
No Tie-Down Straps or Front Wheel Chocks Required!

The Original and still the Best!

Are you a Racer or Trackday Rider fed up with straps that loosen and let the bike lean over (worse fall), scratch bodywork, and compress (blow) fork seals and strain other suspension parts?

Strapless Transport Stands from MOTO-D use a steel rod inserted into the rear axle of modern sport-bikes.

Works in a variety of applications the STS Transport Stands are removable in seconds, using two mounting plates that bolt to the floor.

A bike can be loaded and completely secured in less than one minute.

When secured, the bike cannot move side to side, front to back, or lean when in the STS.

For more info visit www.motodracing.com


17
Hosted by Pacific Track Time, a premier trackday provider on the West Coast it was an awesome weekend. New to us we enjoyed the tracks smooth surface and riders familar with the track said it was a major improvement over the old surface which had gotten a nickname "Bumpywillow". Bumps be gone and the track had a friendly flow that featured several fast sweepers (turns 8-9, 13, and 15) and some tight technical spots (turns 2 and 4). We especially enjoyed (click here to read the full review)



18
Don't let your bike go in flames!

Be proactive and protect it with the MOTO-D R6 Tank Sliders.

MOTO-D's Kevlar Motorcycle Tank Sliders reduce the chance of Fire From Gas Tank Punctures in a Crash. Our R6 Tank Sliders are Handcrafted Carbon Fiber Reinforced with DuPont Kevlar, and are Lightweight.

For more info www.motodracing.com












19
Check your tire pressures for best grip and tire wear both on and off the track. MOTO-D's Digital Tire Guage is Accurate to +/- 0.5 PSI, Digital Readout to 0.1 PSI, and features a Large 2.5' Back-Lit LCD Display. An 18 inch NBR High Pressure Hose with Angled Type Swivel Air Chuck makes it easy to reach the valve stem.

Compare to the Motion-Pro Digital Tire Pressure Gauge and save. ON SALE NOW www.motodracing.com





20
Thanks to all the riders of OCMOTO for their support!

When is cheap not a good deal? MOTO-D's Sportbike Motorcycle Stands don't compare to the cheap wobbly "silver" stands sold by the "motorcycle chain stores". MOTO-D's are STABLE, EASY to use, and a Great VALUE. Black Gloss Finish, Rollerblade Style Wheels. Free Shiping, No Tax, and ON SALE now from www.motodracing.com. Go check out and pick up a pair at Catalyst Reaction www.crstuning.com




VS.

Pages: [1] 2

Page created in 0.33 seconds with 22 queries.

support@ocmoto.com
 Facebook
anything